We are a Crusher machine manufacturers with many products such as Cyclone Collector. Let me introduce its performance indicators and structural design.
The separation effect of the cyclone separator: under the design pressure and gas volume conditions, it can remove solid particles ≥ 10μm. Under working conditions, the separation efficiency is 99%, and in the range of 15%, the separation efficiency is 97%.
Under normal working conditions, the pressure drop of a single cyclone separator under working conditions is less than 0.05MPa.
The designed service life of the cyclone is not less than 20 years.
The cyclone separator adopts a vertical cylindrical structure and is divided into a liquid collection area, a cyclone separation area, and a clean room area along the axial direction. The internal cyclone sub-components are evenly arranged in the circumferential direction and fixed by the upper and lower tube sheets; the equipment is supported by the skirt, and the head is a high-pressure elliptical head.
Equipment nozzles provide mating flanges, bolts, gaskets, etc.
Generally, gas inlet designs fall into three forms:
a)_The upper air intake.
b) Intermediate intake.
c) Lower air intake.
For moisture, we often use the lower air intake scheme, because the lower air intake can use the lower space of the equipment to pre-separate droplets with diameters larger than 300 μm or 500 μm to reduce the load on the cyclone part. The middle or upper part is usually used for drying air. The upper air intake is uniform, but the
The diameter and height of the equipment are increased, and the investment is high; the intermediate air intake can reduce the height and cost of the equipment.
The cyclone separator adopts an integral vertical structure, which is small in size and light in weight. The vertical arrangement of the cyclone tubes is divided into three independent studios by two horizontal partitions. To facilitate internal inspections, each studio is provided with either a personal hole or a hand hole. The cyclone separator includes a shell, an air intake,
Air outlet, emptying, separation unit, manhole, hand hole, manual dust removal, valve control dust removal port, outrigger and other structures.
Our company has many other products, such as classifier machine, welcome to visit our website!