Safe operation of Pulverizer machine
1. After starting, when the standby device reaches normal operation, the crops are allowed to be fed evenly and continuously.
2. Pay attention to the speed of the motor, the thresher, the sound and the temperature of the bearing during operation.
3. When feeding, the operator should stand on the side of the feeding port, the sleeves of the clothes should be fastened, and a mask and work cap should be worn.
4. When feeding, pay attention to whether the grain has hard objects such as stones, sickles, tool screws, etc., to avoid damage to the machine and cause personal accidents.
5. The machine is not allowed to hang belts, fill oil, clean up and troubleshoot the machine during rotation.
6. If the following problems are found, the engine should be turned off, and the machine should be shut down for processing. ①The motor is smoking, ②clogging, ③the crushing quality is not good, ④the bearing is overheated, exceeding 60 degrees.
How to improve the speed difference of the grinder
When the crusher is working, the material enters from the upper feed port, the direction of the movement vector of the material is downward, and it exits at the feed port of the crusher. The hammer hammers the material in the circumferential tangential direction. At this time, the hammering speed of the hammer and the material is different., efficiency. Next, the material and the hammer move circularly on the screen surface in the same direction, the difference in hammering speed between the hammer and the material decreases, and the crushing efficiency decreases. The basic principle of the shear hammer mill to improve the efficiency of the mill is to increase the difference in the hammering speed of the mill hammer and the material, and this concept is recognized by many experts and colleagues. Therefore, improving the speed difference of the pulverizer has always been pursued by people.
We are a Crusher machine manufacturers, welcome to visit our website!
